Have a specific question?
If your question isn't answered below or you wish to discuss starting your project, don't hesitate to contact us!
Frequently Asked Questions
Very little mess is made. Our process is safe enough to use inside of hospitals. We begin by using a commercial diamond grinder that is hooked up directly to our vacuum while removing the top layer of the cement. This kicks up very little dust into the air. If we feel it will be a concern, we do cover items with plastic tarps.
We can resolve most chips, cracks and areas that may be subject to pooling with a mender that bonds to the cement. Since the mender is five times stronger than concrete, it is very unlikely that a mended crack will crack again or disturb the finished coating.
Our main diamond grinder does weigh around 1,000 llbs. If there is a way to access the basement through a walk-out basement door, an elevator or appropriate ramps, we can efficiently complete the project.
If the diamond grinder cannot be easily brought into the desired location, we do have smaller, handheld devices that can be used to resurface the floors.
We provide superior products that add functionality and safety to every space. We are so confident in our products that we offer an exclusive "15-Year No-Chip, No Peel" warranty. If your floors chip or peel within 15 years after we resurface and coat your concrete, we will repair the chip or peel free of charge. Our warranty is not valid if the concrete slab loses integrity and develops a crack which damages the coating.
We are happy to communicate whichever way that you prefer through the means below:
- Use our contact form (click here)
- Send an email to: firstname.lastname@example.org
- Call or text us at: (810) 730-1715
That is up to you depending on the results you desire, how long you would like the product to last, and the amount of money you want to spend.
Painting your floor may be cheap ($1.75/sq-ft), but the surface can easily chip and fade soon after it is applied.
An epoxy floor coating may be less affordable at $3-$7/sq-ft, but is more likely to fade, discolor, turn yellow, and even crack since epoxy is not flexible. Epoxy floors can take up to seven days to fully cure before you can drive or put heavy equipment back on it.
Our Method: Poly-urea (base-coat) with poly-aspartic (top-coat) coatings, that we use, is "newer technology" than older epoxy techniques. When using this method, you get the strength of the poly-urea and the flexibility of poly-aspartic. Our coatings are in the same price range as epoxy floor coatings (depending on application) but are much more flexible than epoxy and 100% UV resistant - less likely to fade or yellow in direct sunlight. Poly-urea is also more resistant to most types of chemicals which makes it a great solution for garages, commercial floors, and industrial applications. Hospitals love us because our coatings are 100% anti-microbial and 100% anti-bacterial resistant. Poly-urea coatings can be walked on in 4 hours and driven on as soon as 24 hours after installation.
Whether wet or dry, our floor coatings are very slip-resistant and ideal for indoor (like workspaces) or outdoor (like patios and pools) scenarios. Although they look beautiful and shiny, the floors have a slight orange-peel texture that makes for a great gripping surface.
Most floors the size of a 1-2 car garage can be completed in as little as 8 hours. You can walk on our floors 4 hours after its completed and drive on the floors as soon as 24 hours after we are finished. Jobs over 1800 sqft may take up to two days to complete.